Send us a quick message!
Call for guaranteed low pricing and quantity discounts!
Prime Rating: 57.6 kW
Standby Rating: 64 kW
$13,556.
| Engine Specifications | |
| Make | Iveco |
| Model | N45 SM2 |
| EPA | Tier III |
| Type | Diesel |
| Horsepower 1800RPM | 94 |
| Speed Governor | Mechanical |
| No. cylinders | 4 |
| Displacement | 4.5L |
| Aspiration | Turbocharged |
| Oil & Filter Replacement | 600 hrs |
| Exhaust Outlet | 3.0 inches |
| Electrical System | 12 VDC |
| Alternator | 90 Amps |
| Starter | Bosch |
| Battery | 650 CCA |
| Alternator Specifications | |
| Rating | (105/40°C) Standby |
| Type | 4 Pole-Revolving Field |
| Speed | 1800rpm |
| Insulation System | Class H |
| Single Phase | 4 Lead |
| Three Phase | 12 Lead |
| Pitch | 2/3 |
| THD | <5% |
| Coupling | Flexible Disc |
| Bearings | 1 |
| Automatic Voltage Regulation | +/- 1.5% |
| Single Phase Rating | 1.0pf |
| Three Phase Rating | 0.8pf |
Experienced Design:
Generator is not intended for use in enclosed areas or where free flow of air is restricted.
Backfeed to a utility system can cause electrocution and/or property damage. Do not
connect to any building’s electrical system except through an approved device.
Specifications are subject to change without notice.
Open 9:00 AM - 5:00 PM pacific time. 800 341 7027 or 619 669 1995
Payment terms 2% discount for ACH or wire transfer. Visa, Master card accepted.
Hardy Diesels & Equipment Inc 15749 Lyons Valley Rd. Jamul CA 91935 Toll Free: (800) 341 7027 US: (619) 669 1995 |
|
